Kalis

A kalis is a type of double-edged Filipino sword, often with a "wavy" section, similar to a Keris. Unlike the Kris, the Kalis's double-edged blade can be used for both cutting and thrusting.

The wavy portion of the kalis is said to be meant to facilitate easier slashing in battle - since a straight edge tends to get stuck in the opponent's bones, the wavy portion allows the kalis' bearer to more easily pull the weapon out of his opponent's body.

Blade

Moro kris (kalis) nomenclature, given in three major Moro dialects.

In this example, the blade's lamination pattern can be seen. The darker high-carbon cutting edge of the blade can also be noticed. The said harder high-carbon cutting edge is termed as "sinubo" (roughly, sandwiched) in the local dialect.

The kris blade is defined as one that is wide on the base and double-edged. It is capable of delivering both chopping and slicing cuts. While many assume the traditional form of the kris is the fully wavy blade, the half-waved half-straight, as well as the fully straight blades, are equally if not more common, as straight blades were more practical in combat. Moro kris blades generally range in size from 18 to 26 inches (46 to 66 cm), though as with all Moro weapons there are exceptions. Generally however, the larger blades are found on later pieces, while the oldest Moro Kris tend to be of smaller stature. Damascene patterning is sometimes evident though often not as controlled as seen in the complex pattern welding of the smaller Malay keris.

Guard (gangya)

The demarcation line indicating the separate gangya (guard) can be seen.

The gangya (guard) of a kris blade is made in such a manner that their lines flow very elegantly into the blade, never interrupting in continuity from transition from gangya proper to blade. Antique kris (kris made before 1930) were made with a separate gangya (guard) like their Malay cousins, while more modern made kris lack this feature and have gangya that are in fact integral to the blade. Some newer kris do have an engraved line to simulate the appearance of a separate gangya, but when inspected closely it is evident that this is only a cosmetic engraved line, and not a true separate gangya. At some point near the early 19th century, gangya started to be made with a distinct 45-degree angle near the terminus. Opposite the hook-like fretwork on the gangya, exists a curved cavity. It has been suggested that this cavity is representative of the trunk of an elephant, others contend that it is the mouth of the naga (serpent) with the blade being the tail, and still others contend that it is in fact the open mouth of an eagle.

Modern tourist kris blades can be distinguished by a number of features that once identified are quite easy to spot. Perhaps the easiest to identify feature of a modern tourist/fake kris blade are the shaping of the waves. Traditional kris feature gracefully undulating waves that are forged deep into the blade to penetrate straight to the centerline of the blade. Tourist kris, on the other hand, feature shallow angular waves, that appear to be cut out of the steel rather than forged into the blade.

Hilt (handle)

The above example is that of a simple hilt, wrapped in lacquered fiber, to improve grip. Having a non-ornate hilt and pommel, the above kris must have come from a typical Moro warrior.

The hilt of kris are either straight or slightly curved (most common on cockatua pommel hilts). Pommel variations are many, however the most common are the horse-hoof (the most distinctive variation coming from the Sulu Sultanate) and the cockatua. Commonly the pommel is made of beautiful hardwood burl (such as banati) with the hilt being wrapped in a lacquered natural fiber (such as jute). However on higher end kris, belonging to the upper class, the pommel would be made of such exotic materials as ivory, silver plating, solid brass, etc. with hilts often lavishly bound with silver or swasaa (an alloyed mixture of gold similar to red-gold) bands frequently with braided silver wire interspersing the chased bands.

Scabbard

The above example is that of a simple scabbard made of two loose pieces of wood, secured together by loops of brass.

The Moro kris scabbard shares many common characteristics with their Malay cousins, but are unique in their own style and form. Scabbards tended to be made of wide grain native hardwoods (eg. mahogany, teak, narra, etc.), and lashed together with rattan bindings. Sometimes the cross-piece is a separate piece, with the tail-piece socketed in, but quite often the cross-piece and tail are made of one board. Older scabbards feature wider rattan lashings, and normally only cover small sections (eg. bottom 1/3, 4 inch bands, etc.) of the scabbard.

Other information

It is believed that the Kalis first appeared in the 13th century. Its original location is the island of Java which is situated in the Indonesian archipelago. From there Kalis migrated to its today's location -- the Philippines . Countries in which the Kalis is considered to be one of the main weapons include Malaysia and some other countries in Southeast Asia.

The Kalis is available in different shapes and sizes. Usually, the Kalis has a special blade that is straight at the top and has a wavy shape at the handle. All the Filipino types of Kalis swords are both larger and heavier than those from Indonesia. Although it is considered to be a slashing weapon, Kalis has a special thrusting power which is very dynamic.

Its durability and sharpness can be comparable to the Japanese katana. Kalis can easily cut some hard objects. These types of swords are made by hand in several Filipino tribes.